Now that all the leads are in place -

1) reinstall the front fairing panels

2) reinstall the tank (a helper might be needed for this)

be careful that none of the leads gets stressed.

the plastic lubricant will aid in getting things to slip into place

3) check clearances of the leads under the tailsection and bolt the frame back down

4) tiewrap the HICAP leads in place as needed

5) reinstall the battery.

Enjoy near instant starting.

- then - email us and let us know if the kit has eliminated all of your starting and running issues.

If you feel the bike is running better than it did before, it is probably not your imagination.

The superior ground plane from the HICAP does allow the electrical system to operate at the maximum of its ability.

We get comments of this effect all the time.